This commit updates how ondemand requests are checked to include a check to see if the request is ready when an instance is added to the ready instances set. Without this change the delay between a check for the instances being ready and the last instance becoming availalbe could cause the API to show all instances are ready, but the request not be considered ready yet.
This commit updates clone_vm in the vsphere provider to raise an error when a target folder can not be found. Without this change, if the target folder can not be found a clone is attempted anyway, resulting in an error and backtrace.
This change adds a capability to vmpooler to provision instances on
demand. Without this change vmpooler only supports retrieving machines
from pre-provisioned pools.
Additionally, this change refactors redis interactions to reduce round
trips to redis. Specifically, multi and pipelined redis commands are
added where possible to reduce the number of times we are calling redis.
To support the redis refactor the redis interaction has changed to
leveraging a connection pool. In addition to offering multiple
connections for pool manager to use, the redis interactions in pool
manager are now thread safe.
Ready TTL is now a global parameter that can be set as a default for all
pools. A default of 0 has been removed, because this is an unreasonable
default behavior, which would leave a provisioned instance in the pool
indefinitely.
Pool empty messages have been removed when the pool size is set to 0.
Without this change, when a pool was set to a size of 0 the API and pool
manager would both show that a pool is empty.
This commit fixes the purge_unconfigured_folders feature to ensure that it can successfully identify folders and instances that are no longer used. Without this change the feature does not work as advertised.
This commit adds detection for redis connection failures to pool_manager. When a connection fails the error will be raised to executeforcing the connection to be re-established. Without this change, when a redis connection fails, it generates a redis connection error, which is swallowed by a rescue for StandardError, preventing the manager application component from recovering in the case of a redis connection failure.
This commit adds the extra_config option to vmpooler to allow specifying additional configuration files to load from. Without this change vmpooler does not offer a mechanism to provide additional configuration files for the application.
This commit adds a capability to vmpooler to reset a pool, deleting its ready and pending instances and replacing them with fresh ones. Without this change vmpooler does not offer a mechanism to reset a pool without also changing its template.
Prior to this commit the pooler had no awareness of the complete set of
hostnames that are currently in use. This meant that it was possible to
allocate the same hostname twice, which would result in the original
host with that hostname becoming unreachable.
This commit adds a check for the existence of the
`vmpooler__vm__<hostname>` key before attempting to clone the vm.
This should prevent duplicate hostnames.
If the hostname is already taken, `_clone_vm` will retry with a new
random hostname multiple times before raising an exception.
Prior to this commit the hostname_shorten regex wouldn't match the
updated human readable hostnames because they contain dashes.
This commit updates the regex to capture dashes in the hostname, and
adds a few specs to verify that behavior.
This commit updates the create_linked_clone pool option to correctly detect when linked clones have been set at a pool level. Without this change a pool setting create_linked_clone to false is not interpreted correctly, and a linked clone is created if possible.
This change adds the running host for a VM to the API data available via /vm/hostname. Without this change the running host would be logged to vmpooler log, but not available any other way. Additionally, the data will specify if a machine has been migrated. Without this change parent host data for a vmpooler machine is not available via the vmpooler API.
This commit adds a new configuration parameter to allow setting whether to create linked clones on a global, or per pool basis. Without this change vmpooler would always attempt to create linked clones. The default behavior of creating linked clones is preserved.
This allows the user to change the cluster in which the targeted pool
will clone to. Upon configuration change, the thread will wake up and
execute the change within 1 second.
Before this change looping over many pools would query the redis backend
for each pool, leading in slow response from the backend for configurations
with many pools (60+)
Changed the requests to use redis pipelines https://redis.io/topics/pipelining
This is supported since the beginning, so will not force any redis update for
users. The pipeline method runs the queries in batches and we need to loop
over the result and reduces the number of requests to redis by N=number of
pools in the configuration.
This commit updates vmpooler to set configuration values received via environment variables to integer values when an integer value is expected. Without this change vmpooler does not support setting integer values via environment variables. Additionally, testing is added for configuring vmpooler via environment variables.
To support this testing the gem climate_control is added, which allows
for testing environment variables without those set variables leaking to
other tests.
This commit updates vm usage stats collection to replace all instances of '.' characters within node strings. Without this change the node string containing a '.' character causes the metric to be interpreted as containing another node.
This commit updates providers_spec so the test ensures array content of the providers match. Without this change the provider_spec test will fail when comparing providers if the order is not exactly the same in each array.
This commit updates vmpooler to ship VM usage stats when a VM is destroyed. The stats are gathered for jobs based on user and pool name. If a jenkins build URL is present then this is broken down by user, instance, value stream, branch and project. Additionally, if present then the RMM_COMPONENT_TO_TEST_NAME will be listed after project. Without this change we do not collect stats on per VM usage and its correlation to users and pools.
This commit fixes checking of a VM that has already been identified as ready. Without this change a ready VM that has failed will be identified as having failed, but will not successfully be removed from the ready queue. Additionally, the default vm_checktime value has been reduced from 15 to 1 to ensure that ready VMs are checked within one minute of the time they have reached the ready state by default.
Lastly, the docker-compose files are updated to specify that the redis
instance used is a local redis instance.
This commit updates delta disk creation to reduce the likelihood of this being run more than once for any given template. Without this change an error can be generated with vsphere 6.5 or later when a template is updated, and then the update is reverted. The error prevents the image from being used because the template is never marked as prepared. To address this any failure is now logged, and the template is marked as prepared regardless of whether this was successful, or not, which allows the image to be used despite the error. This failure mode is more graceful and allows the pool to continue to function.
This commit refactorss the check_pool method in pool_manager.
Specifically, each commented section describing a stage of check_pool is
broken out into a separate method and check_pool is simplified by
calling these methods. Without this change it is difficult to follow the
intent for or make changes to check_pool.
Additionally, a docker-compose file is added to make it simple to launch
an all-in-one vmpooler instance along with a separate redis server with
docker.
This commit updates destroy_vm to remove references to its mutex tracking object when destroyed. Without this change a VM that is destroyed will leave its mutex tracking object forever causing the pool manager memory footprint to increase.
Prior to this commit the docs and examples used 'company.com'
(a real domain). This commit changes those occurrences to
'example.com', which is a IANA-managed reserved domain.
This commit removes find_pool, which is no longer used. Additionally, tests which are listed as pending and have been resolved are removed from pending tests. Lastly, a folder check that doesn't make sense given the change in method for finding objects is removed.
This commit enables optional purging for vms and folders when they are
not configured in the vmpooler provided configuration. Base folders are
determined from folders specified in the pool configuration. Then,
anything not configured in that folder for that provider and is not a
whitelisted folder title will be destroyed. Without this change vmpooler
will leave unconfigured vms and folders behind and any vms will be left
running forever without manual intervention. Additionally, any
associated redis data will never be expired.
* Minimize duplicate checking of VMs
This commit updates check_pool pending, running and ready methods to greatly reduce instances in which the VM object is retrieved. Without this change get_vm is run for each of these check_pool steps even though the VM is already validated as being in inventory being running the check. This is left for checking running VMs when the VM is no longer ready. Without this change there is an unnecessarily large volume of VM object checks.
* Make hostname mismatch checking optional
This commit makes hostname mismatch checking optional on a pool and global config level. The default behavior of checking this is preserved. When disabled _check_ready_vm will not run get_vm, which allows for ready VMs to be checked without retrieving an object from vsphere and waiting for a free provider connection. Without this change it is not possible to disable VM object retrieval in _check_vm_ready.
* Check if a hostname return is empty string
This commit checks whether a hostname returned is an empty string.
Without this change a VM that returns a hostname with a empty string
will report as having a hostname mismatch, which may happen before all
VM data is updated.
* Only check hostname for mismatch after time since ready has past
Configure hostname checking so it is not checked until a VM has been
ready for greater than one minute. Without this change hostname checking
will often fail because the configured value has not propogated to the
VM on some platforms before this check is run.
* (POOLER-34) Ship clone request to ready time to metrics
Before, we were already capturing this metric but we failed to ship
it anywhere. This ships the appropriate metric as `time_to_ready_state`
Dashboards can be found in grafana.
* Add spec test to ensure metric is being shipped properly on
move_pending_vm_to_ready call.
This commit updates a test reference to find_vm. This method has been renamed find_vm_folder, so this commit updates usage to reflect the new title and reduced arguments required. Without this change tests fail on master.
This commit updates usage of max_tries to ensure that the increment of the try value happens after evaluation of whether max_tries has been exceeded. Without this change max_tries doesn't work as advertised. Additionally, checking looks to see if try is greater than or equal to so the try count exceeding max_tries would also be detected.
This commit updates get_pool_vms to only return if the object is a VirtualMachine. Without this change a folder wtihin a VM target folder can be discovered and destroyed as though it were a VM.
This commit updates how template delta disk creation is evaluated. Without this change template deltas are created for every template on each applicatoin startup. This change updates this behavior to instead run template delta disk creation only once per template configured for a pool. Without this change it is possible to get a template to a state where the XML depth is too great to be read with default settings and the template requires a new clone to resolve.
This commit updates check_pool inventory check to prevent multiple instances from running at once. Without this change the inventory check may run in multiple threads simultaneously.
This commit renames find_folder to find_vm_folder to clarify its intent to retrieve folders from the VM hierarchy. Without this change find_folder implies it may find folders that are not within the VM hierarchy.
This commit replaces find_folder to use information already known about folders to determine their location and quickly fail when it does not exist without traversing the hierarchy. Without this change find_folder is very inneficient and can take a long time to return depending on how deep in the folder tree the folder exists.
This commit reduces object lookups used for get_vm. Without this change get_vm looks up the VM folder, which is already used and known to find the vm with find_vm.
